Kicker 2009 KM Components Owner's Manual download pdf (Page 4)

KMCOMPONENTSYSTEM

WIRING

Carefully place the speaker wire in a location that is clear of standing water and moving components of

the vessel. For reference, the Blue wire is Positive and the Grey wire is Negative. Mount the crossover to

the woofer’s back plate with the enclosed phillips-head M3 stainless steel machined screws, or mount

the crossover remotely in a location free and clear of standing water. The locking crossover cover with

water resistant gasket is removable for wiring installation; it helps prevent terminal corrosion and electrical

shorting. The positive and negative gold plated terminals are of different sizes and correspond to the

appropriate gold plated positive and negative wire connectors. Take off the crossover cover, and connect

the wire from the woofer to the “WF” terminal and the wire from the tweeter to the “TW” terminal. Connect

the supplied 15 feet (4.5m) of wire to “IN” terminal in the crossover. Carefully route the wires through the

slot between the crossover and crossover cover, and snap the crossover cover back on the crossover.

Connect the other end of the heavy gauge wire to your ampliﬁ er in accordance with its owner’s manual.

SPKR +

SPKR -

Crossover Cover

Slot

Source Unit or Ampliﬁ er

Integrated moisture draining system

2009 KM Components Multilingual c01.indd 42009 KM Components Multilingual c01.indd 4 11/21/2008 3:38:11 PM11/21/2008 3:38:11 PM

1 2 3 4 5 6 7 8 9 ... 19 20

No comments

Kicker 2009 KM Components Owner's Manual Page 4