Kicker Solo-Baric D-Series Owner's Manual Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
RECOMMENDED ENCLOSURES
Solo-Baric drivers are designed to be used in small cabinets and behave very much as
an isobaric pair of KICKER Competition™ drivers. They are optimized for excellent
performance in a specific range of sealed or single reflex bandpass enclosures. Use of
these drivers in non-recommended enclosures can result in driver damage and loss of
warranty on the driver.
The following shows suitable enclosures for Solo-Baric subwoofers. We highly
recommend that custom enclosures varying from the dimensions…and especially bandpass
enclosures…be designed and built by an Authorized KICKER Solo-Baric Dealer.
PANEL DIMENSIONS
Model Panel A (in.) Panel B (in.) Panel C (in.) Enclosure Volume (cu. ft.)
S15d 16-1/2 x 16-1/2 16-1/2 x 11-1/2 15 x 11-1/2 1.5
S12d 13 x13 13 x 11-1/2 11-1/2 x 11-1/2 .88
S10d 12 x12 12 x 10-1/2 10-1/2 x 10-1/2 .66
S8d 10 x10 10 x 8 8 x 8-1/2 .33
Note: Panels should be 3/4” MDF.
SOLO-BARIC D-SERIES SPECIFICATIONS
Model Impedance Max. Amp Sensitivity Frequency Mounting Mounting Hole Recommended
(ohms) Power (dB 1w/1m)‡ Response Depth Diameter Sealed Enclosure
(watts)† (in., mm) (in., mm) Volume
S15d 2, 4, 8 750 89.3 18-100 7, 178 14-1/16, 357 1.5
S12d 2, 4, 8 600 87.7 20-100 5-5/8, 143 11-1/8, 283 .88
S10d 2, 4, 8 450 87.6 24-100 4-7/8, 124 9-3/8, 234 .66
S8d 2, 4, 8 300 86.2 28-100 3-7/8, 99 7-5/16, 186 .33
† Assumes typical music program with minimal amplifier clipping
‡ Methods used for deriving sensitivity vary widely; therefore, caution should be used
when comparing the sensitivity ratings of various speakers. Solo-Baric ratings are based
on a procedure called Theoretical Piston Efficiency, a measurement which reflects the per-
formance of the speaker in real-world applications.
If you have more questions about the installation of your new KICKER component,
see the Authorized KICKER Dealer where you purchased your component. You may
also call our Technical Services phone line at 405-624-8583 for technical assistance.
Page view 2
1 2 3 4

Comments to this Manuals

No comments