Kicker VCVR10 Owner's Manual download pdf

Installation Instructions

VCVR Series vented enclosures combine KICKER’s CompVR subwoofer with

computer designed and human-fine-tuned enclosures. They offer a level of

bass performance never before thought possible from a commercially avail-

able enclosure. The VCVR Series enclosures are covered in carpet for protec-

tion and pre-loaded with a CompVR woofer.

The location and orientation of your VC enclosure will affect the quality

and quantity of the bass. Designed for use in SUVs and sedan type vehicles,

the enclosure offers you several mounting options.

The first rule you must remember is that the vent opening in these enclo-

sures cannot be obstructed. Around the tuning frequency of the vent a

substantial amount of bass is created. Therefore we recommend you leave

at least four inches of clear space around the vent.

If the enclosure is to be mounted all the way in the back of the vehicle, it

works best to point the woofer toward the front of the vehicle. Conversely,

if the enclosure is going to be mounted closer to the back seat, pointing the

woofer toward the rear of the vehicle will give you the best results. These

guidelines are good for when the enclosure is mounted cross-ways in the

vehicle as shown below.

VCVR10 / VCVR12

Vented Enclosure Systems

Front Mounting, woofer faces the back of the car!

Rear Mounting, woofer faces the front of the car!

AT LEAST

AT LEAST 4"

FRONT

Congratulations! You have just purchased one of the most flexible subwoofers

yet from KICKER. Your CompVR sub is designed to give you great bass perform-

ance in a wide variety of applications. These installations instructions will help you

get the most out of your new KICKER sub. Thanks for buying KICKER. Enjoy!

1 2 3 4

Summary of Contents

Page 1 - Vented Enclosure Systems

Installation InstructionsVCVR Series vented enclosures combine KICKER’s CompVR subwoofer withcomputer designed and human-fine-tuned enclosures. They o

Page 2 - 4"

When it is more convenient to mount the enclosure along a side wall,your best option is to put it on the left side of the vehicle. (Shown below)This o

Page 3 - Specifications

(Mounting cont.)Model Woofer Imp. Power Top Bottom Height WidthHandling* Depth Depth (Watts

Page 4 - WARNING:

• Damage due to improper installation• Subsequent damage to other components• Damage caused by exposure to moisture, excessive heat, chemical cleane