Kicker KS35 User Manual download pdf (Page 8)

KS-Series Coax Speakers

Wiring Options

Wiring

Hooking up the supplied wires to your Kicker KS-Series Coax Speakers is easy. The end of each wire is terminated with a large

and a small connector. The larger connector is crimped to the gray wire and connects to the larger positive terminal of the speaker.

The smaller connector is crimped to the black wire and connects to the smaller negative terminal of the speaker. The other end of

these wires connect to your source unit or amplifier in a similar manner. The gray wire connects to the positive output of the amplifier

or source unit. The black wire connects to the negative output of the amplifier or source unit. These connections can be made with

the crimp-down style connectors, or with solder and heat shrink or electrical tape to prevent electrical shorting of the speakers.

Note: To get the best performance from your Kicker KS-Series Coax Speakers, we recommend using genuine Kicker Accessories

and Wiring.

SOURCE UNIT or AMPLIFIER

Other

Channel

Installation

If you have any questions about the installation of your Kicker KS-Series Coax Speakers, see the Authorized Kicker Dealer where you

made your purchase. For more advice on installation, click on the SUPPOR

T tab on the Kicker homepage, www.kicker.com. Choose

the T

echnical Support tab, choose subject you are interested in, and then download or view the corresponding information; or E-mail

support@kicker

.com. Please call Technical Services (405) 624-8583 for unanswered or specific questions.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Kicker KS35 User Manual Page 8