Kicker iK501 Owner's Manual download pdf (Page 5)

Volume Up

Volume Down

Play/Pause

Skip Forward

(Hold down to Fast

Forward)

Skip Backward

(Hold down to

Rewind)

Mute iK501 Output

(Hold down to turn

the iK501 on/off)

Navigate upward through the iPod

menu directory or increase values

within the iK501 System Menu.

Press the up arrow while in the Aux-

In Menu to enable the Aux input.

Navigate downward through the iPod

menu directory or reduce values

within the iK501 System Menu.

Press the down arrow while in the

Aux-In Menu to disable the Aux input.

Navigate toward iPod root directory.

Hold down to enter the iK501

System Menu.

Navigate within the iK501 System

Menu. Treble>Bass>Aux-In

Make selections and enter sub-

directories within the iPod.

Use the enter button to exit the

iK501 System Menu.

Figure 5

USINGTHEREMOTECONTROL

The Infrared Remote Control enables you to control your iPod and access the iK501 System Menu from a convenient

location. With the fully featured remote control it is easy to access all of your iPod’s music and/or video content.

Model: iK501

Speaker Design 2 - Way

Woofer Size, in (mm) 5 (127)

Tweeter Size, in (mm) 3/4 (20)

Tweeter Design Silk Dome

Passive Radiator Size, in (mm) 6 X 6 (152 X 152)

RMS Power, Watts @ 1% Total Harmonic Distortion 2 X 20

Effective Frequency Range, Hz 50-20K

Power Supply, Volts (Ampere) 22 (2.7)

Height, in (mm) 8.5 (216)

Width, in (mm) 19.2 (488)

Depth, in (mm) 8.4 (214)

Weight, lb (kg) 9.2 (4.2)

VOL

iKICK

CONNECTINGEXTERNALDEVICES

To connect an external video display to the iK501, make sure the video output is enabled on your iPod device. Connect

a standard RCA composite video cable from the composite video output on the back of the iK501 to the RCA video

input on your external video display. See Figure 3. This is a pass-through connection. If there are any problems with your

external video display, refer to the iPod device manual or the instructions packaged with your external video display.

To connect an external audio device to the iK501, enable Aux-In mode with the rotary control as described in the Auxiliary

Input section on the previous page. Connect your line level device to the 1/8” stereo input on the back of the iK501 with

the included auxiliary cable. See Figure 2. If the sound is distorted, you may be overdriving the auxiliary input. Try turning

down the external device until the sound is no longer distorted. Note: 1st – 3rd Generation iPods require the use of the

auxiliary input for audio playback.

PERFORMANCE

2009 iK501 Multilingual d01.indd 52009 iK501 Multilingual d01.indd 5 4/23/2009 11:50:15 AM4/23/2009 11:50:15 AM

1 2 3 4 5 6 7 8 9 10 ... 19 20

Comments to this Manuals

No comments

Kicker iK501 Owner's Manual Page 5

Comments to this Manuals