Kicker SS-series Full-Range Boxes Owner's Manual

Browse online or download Owner's Manual for Loudspeakers Kicker SS-series Full-Range Boxes. Kicker SS-series Full-Range Boxes Owner's Manual User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Installation Instructions
Your new Kicker SS-Series Full-Range System is equipped with boundary-loaded bass
vents which couple with your vehicle’s interior for enhanced bass response. For most
effective bass loading the rear of the enclosure must be mounted within three inches
to four inches from the rear of the vehicle.
After determining the mounting position, turn the enclosure upside-down and
attach the four mounting brackets to the bottom of the enclosure using the
enclosed small screws. Each bracket must be positioned so the rounded end pro-
trudes approximately 3/4 inch from under the cabinet to allow a screw to easily pass
through it for attachment to the vehicle.
Plug the speaker wires securely into the left and right speaker terminals. Make cer-
tain the polarity is the same on both sides. Failure to do this will result in the two
channels being out of phase and will drastically reduce bass performance.
Position the enclosure in its mounting position and securely attach it to the vehicle
with the enclosed large screws. If the brackets and screws are not applicable to your
installation, some other means must be used to secure the enclosure to your vehicle.
Components Amplifier Power Frequency Dimensions
MModel
Type (per enclosure) Min. / Max. Response (H x W x D)
SS1200
2-Way 2-12” woofers, 25 / 250 30-21kHz 13-1/4”x36-1/4”x20”
2-2x6” compression-loaded 33.66cmx92.08cmx50.8cm
midrange/tweeters
SS1000 2-Way 2-12” woofers, 25 / 200 33-21kHz 12”x35-1/4”x18”
2-2x6” compression-loaded 30.48cmx89.54cmx45.72cm
midrange/tweeters
All models have a nominal 4 impedance.
* assumes typical music program with minimal amplifier clipping
SS1200 / SS1000
Full Range Enclosure Systems
Specifications
Congratulations! You have just purchased the latest in full range speaker enclo-
sures to carry the famous KICKER name. Your KICKER speakers were designed and
engineered by the same team which created many other international award
winning KICKER components like the Solo-Baric
,
Comp VR, and Resolution
driv-
ers. They contain a number of cutting-edge features to give you outstanding per-
formance and dependability. Thanks for buying KICKER. Enjoy!
IIMMPPOORRTTAANNTT WWAARRNNIINNGG
To avoid potential injury from forward movement of the enclosure during abrupt stops
or accidents, this enclosure must be properly installed and securely fastened to you
vehicle.
Page view 0
1 2

Summary of Contents

Page 1 - SS1200 / SS1000

Installation InstructionsYour new Kicker SS-Series Full-Range System is equipped with boundary-loaded bassvents which couple with your vehicle’s inter

Page 2 - WARNING:

• Install slips (screwdriver holes)• Damage caused by exposure to water and/or excessive heat.• Damage through negligence, misuse, or accident.• Items

Comments to this Manuals

No comments